Ball Thrust

The Thrust Ball bearings are used for high axial loads at low speeds. These cannot operate at high speed, when centrifugal or radial force cannot be handled by the bearings. They can be located endwise in one direction only.

Thrust Ball Bearing
Bearing No. Dimension(mm) Mass kg Bearing No. Dimension(mm) Mass kg
  d D B     d D B  
51104 20 35 10 0.038 51220 100 150 38 2.4
51105 25 42 11 0.056 51222 110 160 38 2.6
51106 30 47 11 0.055 51224 120 170 38 2.9
51107 35 52 12 0.083 51226 130 190 45 4.32
51108 40 60 13 0.12 51228 140 200 46 4.6
51109 45 65 14 0.15 51305 25 52 18 0.171
51110 50 70 14 0.16 51306 30 60 21 0.265
51111 55 78 16 0.24 51307 35 68 24 0.378
51112 60 85 17 0.29 51308 40 78 26 0.55
51113 65 90 18 0.324 51309 45 85 28 0.69
51114 70 95 18 0.36 51310 50 95 31 1
51115 75 100 19 0.392 51311 55 105 35 1.34
51116 80 105 19 0.46 51312 60 110 35 1.43
51117 85 110 19 0.46 51313 65 115 36 1.57
51118 90 120 22 0.655 51314 70 125 40 1.95
51120 100 135 25 1 51315 75 135 44 2.7
51122 110 145 25 1.08 51316 80 140 44 2.8
51200 10 26 11 0.029 51317 85 150 49 3.7
51205 25 47 15 0.109 51318 90 155 50 3.9
51206 30 52 16 0.138 51320 100 170 55 5.1
51207 35 62 18 0.22 51405 25 60 24 0.31
51208 40 68 19 0.27 51406 30 70 28 0.51
51209 45 73 20 0.32 51407 35 80 32 0.76
51210 50 78 22 0.39 51408 40 90 36 1.06
51211 55 90 25 0.69 51409 45 100 39 1.41
51212 60 95 26 0.69 51410 50 110 43 1.86
51213 65 100 27 0.75 51411 55 120 48 2.51
51214 70 105 27 0.79 51412 60 130 51 3.08
51215 75 110 27 0.85 51413 65 140 56 3.91
51216 80 115 28 0.925 51414 70 150 60 4.85
51217 85 125 31 1.3 51415 75 160 65 6.08
51218 90 135 35 1.77 51416 80 170 68 7.12

Our Products
 
 
 
 
  Copyrights © UKN Bearing 2013. All Rights Reserved. Home   |   About Us   |   Bearing Uses  |   Infrastructure   |   Equipment   |   Careers   |   Contact Us  
Designed by: iSHA Technology Solution Inc.